thinkyhead AnHardt Drachenkaetzchen

M80 - Power On

control Turn on the power supply PSU_CONTROL

Description

Turn on the high-voltage power supply. Requires a board that’s powered from USB or another 5V source.

Notes

A PS_ON_PIN is also required. Check your board’s pins file for the default.

For Marlin 1.1.9 and earlier this feature is enabled by POWER_SUPPLY.

Some octoprint plugins filter out M80/M81. If M80 does not work, use a plain serial terminal first prior reporting a bug.

Usage

M80 [S]

Parameters

[S]

Report Power Supply state

Example

M80 ; power on